What is Cricut Fine Point Blade & How to Load It?
Are you looking for an answer on the importance of the Cricut Fine Point Blade and how to load it before the commencement of the cutting process? Developed from German carbide steel, it can create the most twisted cuts with the machine. It also delivers long-lasting, accurate cutting, preparing you to impress every viewer.
Visit- cricut.com/setup
The total number of cuts that the blade can do depends upon the type of material loaded inside it. Crafters referred to Fine Point Blade as the German Carbide Premium Blade. The blade is compatible with Maker, Explore series and can be used with its housing.
However, it’s essential to keep replacing
the blade on time to avoid getting its sharpness worn out and increase its life
span. Furthermore, you are informed to grab all the details described in the
following lines of the article.
How to Load Cricut Fine Point Blade in Cricut Maker?
It doesn’t matter which version of the
electric cutting machine you use to create DIY projects. However, if you
specifically use a Maker machine, loading the blade in it is very effortless.
You need to follow the steps explained in the following lines:
Securely Seated Housing
- It’s very
relevant to know that your blade housing is positioned on the top surface
of Clamp B.
- However,
if the clamp is placed too high, your blade won’t be able to contact the
loaded material.
Clamp Closure
- You must
close the left arm first while closing the clamp arms around the blade
housing.
- The left
arm will have an indentation that will fit easily around the housing.
- Swing the
right arm and close the plastic tab while holding the left arm in place.
- The clamp
arms will be secured around the housing and put smooth pressure to close
the plastic tab.
- After
closing them properly, both the clamps (A & B) will be aligned in
their respective places.
Following the easy loading of the blade,
you’ll get the appropriate result you were expecting from Cricut. Besides that,
it’s very important to keep changing the blade occasionally; for that, you must
read the information below.
How to Replace Fine Point Blade in Cricut Maker?
Suppose you observe that the machine is
losing the capability to give the wished project. Then, it’s an identification
to change your blade before it damages the project or machine. You must be
careful while unwrapping the blade; otherwise, ignore any injuries. Follow
these steps needed to replace the Fine Point Blade in Cricut.
- First,
you are supposed to remove the machine’s blade housing:
●
For Explore or Maker: You must open
Clamp B and remove the blade housing.
●
For Legacy: Remove the blade housing by
unscrewing the right arm housing.
- Second,
pull out the blade from the bottom by gently pushing the pin available on
the top of the housing.
- Third,
smoothly uncover the blade’s cover, protecting it from getting damaged.
- Next,
take the blade and load it inside the empty housing.
- After that,
the housing magnet will hold the new blade in place.
- Now,
replace the blade housing inside the machine:
●
For Explore or Maker: go back to the
blade housing to Clamp B and close it.
●
For Legacy: Tighten the screw by placing
the blade housing inside the black arm.
- Lastly,
the blade replaced will start cutting the loaded materials as instructed.
Besides, there will be times when the
installed blade won’t get detected. You shouldn’t need to get panic. For that,
we’ve described the process that must be followed to resolve the issue.
How to Fix Cricut Fine Point Blade Detention Errors?
Under any circumstances, if your Maker
machine isn’t detecting the installed blade, then the error can be resolved by
going through the following footsteps:
- First,
you must be sure that the tool installed inside Clamp B matches the one
proposed on the Load step selected in the Design Space.
- Second,
if you don’t recommend the tool, click Edit Tools and choose a different one.
- Third,
Clean off the reflective surface from the housing by removing Clamp B.
- Then,
reinstall the tool in Clam B and select the flashing Go button.
- Next,
remove the tool from Clamp B. Take a microfiber cloth and softly clean the
tool sensor.
- Select
the flashing Go button and reinstall the tool inside Clamp B.
- Take a
test cut with a basic step by opting for a different adaptive tool like
Knife Blade, Rotary Blade & Scoring Wheel.
- Here you
go; your issue of failing to detect the install blade will be resolved.
Once the problem of detecting the blade is resolved,
Cricut will resume its pending work and decrease the user’s tension.
Conclusion
Most crafters prefer using this blade to do
complicated cutting of the material enveloping the thinnest to thickest
material while crafting projects. The Fine-Point blade has a dimension of 11.4
x 2.5 x 7.6 CM with a weight of 0.2 pounds. Knowing about its loading process,
replacement process, and many more are essential to get the proper result.
FAQs
Question: How can I keep my Fine Point Blade sharp?
Answer:
One of the common methods to sharpen the Cricut
Blade is to ball up the aluminum foil and remove the blade housing from the
machine. Press the blade housing pin to stick the blade further. Then, punch
the blade over the foil ball at least 50 times. Once the process completes,
you’ll see the cuts much more cleanly.
Question: What is the time duration of Cricut Blades?
Answer:
It's obvious that Cricut blades fade after some
time. However, the time duration of the blade depends upon the material you
upload. It might be assumed that the blade lasts for 03-06 months.
Question: What materials can be cut down by a Fine Point blade?
Answer: Materials such as cardstock, paper, sticker paper, infusible ink
transfer sheets, adhesive vinyl, iron-on vinyl, and many more. However, the
cutting process will completely depend upon the weight and size of the
material.
Source https://cricutdesignmachine.wordpress.com/2023/05/06/what-is-cricut-fine-point-blade-how-toload-it/
Comments
Post a Comment